PE Pumping station Ø1000 x 1400mm fully assembled/installed. Equipped with two Feka VS 750 MNA stainless steel submersible waste water pumps. Ideally suited for waste water and sewage (containing faecal matter) or rainwater. Fully assembled and equipped with DSD guide system, non-return valve, 5 metre casing pipe and a cast iron/concrete cover D400. Maximum capacity: 48 m3/hour (2x 24.0 m3/hour). Maximum delivery head: 9.6 mWk. Free passage: 50 mm. Maximum waste water temperature: 40 degrees Celsius.

Equipped with:
- Flat bottom with floating edge
- 1x Inlet connection Ø160 mm spigot
- 1x Pressure pipe Ø90 mm
- 1x Cable sleeve Ø75 mm
- 2x Feka VS 750 MNA 230 Volt 50 Hz pre-assembled with installation kit
- 2x Installation kit consisting of DSD guide system with ball valve and ball shut-off valve
- 1x cable protection tube 75 mm, length 5 metres
- 1x Cast iron cover Class D (heavy traffic)
- 1x Concrete adjustment edge 900x900x200mm
- 1x NG Panel pump control with level probe and high water float switch