B-SAEVE PVC fitting

The B-SAEVE is a PVC fitting that greatly simplifies the installation of any water heating appliance with a fixed water connection and a pressure relief valve. The B-SAEVE is highly recommended, particularly for built-in appliances such as close-in boilers and boiling water tap reservoirs, which are almost always equipped with a pressure relief valve. Because the outlet of the pressure relief valve is an open connection to the sewer, there is a risk that any stagnation in the drain will cause water to flow back into the kitchen cupboard. This occurs regularly and, over time, causes serious damage to the cupboard and sometimes also to the floor. By using the B-SAEVE, you can easily prevent this and be sure of a good odour seal and protection against sewage backflow. In addition, you reduce the risk of blockages, because the B-SAEVE aerates the drain if necessary, allowing the water to flow through at a higher speed and greatly reducing the risk of blockages due to sediment. The B-SAEVE Plus has an additional vent valve to prevent splashing from the built-in siphon. This occurs when the shut-off ball in the B-SAEVE closes later due to a lot of air from the drain. The B-SAEVE Plus is therefore ideal for situations where backflow from the sewer occurs frequently rather than sporadically. Of course, the B-SAEVE Plus is also suitable for sporadic backflow or even for preventive use.

• Worldwide delivery
• Over 50 years of experience